Wiper XSWR03

Function:
Wipers are designed to keep dust, dirt, sand and others off the rod and the sealing and guiding elements, avoiding abrasive damage caused by external contamination.

Features:
  • The profile is designed with interference on the OD which provides a good static fit, preventing the entry of humidity and other contamination via the outside diameter.
  • Tight seat in the housing ensures that the wiper is held in place.
  • Prevention of corrosion in the seat due to the use of a retainer ring in hard plastics.
  • Not suitable for pressure from the trailing side.
  • For housing acc. to ISO 6195-1986 – Type B.

Application

  • Reciprocation rods in hydraulic cylinders, plungers.
  • Max. pressure 0 bar, max. speed 4 m/s.

Seal housing recommandation

Tolerances[mm]  
L
+ 0,2 
∅ NA
H11 
∅ NI
f8 
 
Surface roughnessRtmax [ µ] Ra [ µ] 
Bottom of groove
≤ 6,3≤ 1,6
Face of groove
≤ 15≤ 3
 
Sliding surfaceRtmax [ µ] Ra [ µ] 
PU, elastormeres
≤ 2,5≤ 0,1 - 0,5
PTFE
≤ 2≤ 0,05 - 0,3

Installation

Press-in installation; separate installation of retainer ring and elastomer part possible.