Rotary Seal XSOS01
Function:
Rotary seals are designed to seal the pressurized hydraulic fluid against the atmosphere, preventing leakage and pollution of the environment or to transfer liquids and/or gases from a stationary part into or out of rotating machinery.
Features:- The profile is designed with interference on the OD which provides a good static fit, preventing the entry of humidity and other contamination via the outside diameter.
- Tight seat in the housing and an additional retainer ring in hard plastic or Aluminium/Steel ensures that the seal is held in place.
- Tension spring for increasing the bonding force.
- Not suitable for high pressure from the trailing side.
|
Seal housing recommandation
| Tolerances | [mm] | |
|---|
L
| + 0,2 | |
∅ NA
| H8 | |
∅ NI
| f8 | |
| |
|---|
| Surface roughness | Rtmax [ µ] | Ra [ µ] |
|---|
Bottom of groove
| ≤ 6,3 | ≤ 1,6 |
Face of groove
| ≤ 15 | ≤ 3 |
| |
|---|
| Sliding surface | Rtmax [ µ] | Ra [ µ] |
|---|
PU, elastormeres
| ≤ 2,5 | ≤ 0,1 - 0,5 |
PTFE
| ≤ 2 | ≤ 0,05 - 0,3 |
Installation
Press-in installation; separate installation of retainer ring and elastomer part possible.
