Piston Seal XSPS81
Function:
Piston seals are designed to seal the pressurized hydraulic fluid against the atmosphere or between two pressurized spaces.
Features:- Asymmetrical, double acting piston seal, designed with interference of the preload element on the ID and slight interference of the PTFE glide ring on the OD.
- High pressure force because of a machined rubber preload element.
- Less relative movement of the rubber part compared to an O-Ring giving the seal a higher wear resistance.
- Excellent sealing performance in low and high speeds.
- Suitable for positioning functions.
- Negligible tendency to “stick-slip” effect, good sliding properties.
- Low break-away load after long standstills.
- Excellent gap extrusion resistance.
- Can be used in grooves where no O-Ring is possible.
|
Seal housing recommandation
Tolerances | [mm]  |   |
---|
L < 10 mm
| + 0,2 | |
L ≥ 10 mm
| + 0,3 | |
∅ NA
| H8 | |
∅ NI
| h8 | |
|
---|
Surface roughness | Rtmax [ µ]  | Ra [ µ]  |
---|
Bottom of groove
| ≤ 6,3 | ≤ 1,6 |
Face of groove
| ≤ 15 | ≤ 3 |
|
---|
Sliding surface | Rtmax [ µ]  | Ra [ µ]  |
---|
PU, elastormeres
| ≤ 2,5 | ≤ 0,1 - 0,5 |
PTFE
| ≤ 2 | ≤ 0,05 - 0,3 |
Installation
Snap-in installation.
Attention: PTFE glide rings needs calibration after installation!